Standard Multifunction Meters
-
- 100A direct connected
- High-definition backlit LCD display
- Four module width DIN rail mounted
- Import/export active/reactive energy per phase/totals
- 2 x pulse outputs
- Modbus or MBus comms
- LED pulse indication
- Reversible Input direction
- Generator tariff mode
- Single-phase and three-phase network compatible
Call for Prices
-
- Energy pulse LED
- -/1A or -/5A CT input
- Single phase or three phase network compatible
- Programmable voltage and CT ratio
- True RMS measurement
- Cost effective and accurate
- Modbus or Mbus communication
Call for Prices
-
- Single phase or three phase network compatible
- Pulse output and Modbus communication
- Four module DIN rail mounted
- 330mV current transformer input
Call for Prices
-
- Double CT connection
- Single phase or three phase network compatible
- Pulse output and Modbus communication
- Four module DIN rail mounted
- 330mV current transformer input
Call for Prices
-
- Four module DIN rail mounted
- Energy pulse LED
- 4 x Three Phase or 12 x Single Phase* Inputs
- Network compatible
- Independently programmable CT ratios
Call for Prices
-
- Network monitor + 3 Rogowsk current sensors
- 80mm, 142mm or 190mm coil diameter
- Three-phase network 80...500V (phase-phase)
- Connection on dedicated Rogowski current sensors
- Pulse output and RS485 communication
Call for Prices
-
- High-definition backlit display
- Three-phase line 50...460V (phase-phase)
- Dedicated CT connection
- Programmable CT ratio
- Active energy cl.1
- Phase sequence correction, diagnostic
Call for Prices
-
- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- Single phase & 3 phase (3 or 4 wire) network unbalanced load
- –/1A ,-/5A or 0.333V current transformer operated
- 190…440V 50/60Hz measured voltage
- 8 digit LCD display
- Self supplied auxiliary
- Programmable CT ratios
- Pulsed or RS485 output
Call for Prices
-
- Kilowatt hour / active energy meter
- 4 module DIN rail mounting
- -/5A current transformer operated
- 3 phase 4 wire network unbalanced load
- Active energy class 1
- Reactive energy class 2
- Total active energy
- Total reactive energy
- 230V/400V 50Hz measured voltage
- 8 digit LCD display
- Programmable CT ratio
- Auxiliary supply 230V 50/60Hz
- Pulse and RS485 output
Call for Prices
-
- 4 module wide DIN rail mounting
- Single & 3 phase (3 or 4 wire) network unbalanced load
- 3-phase line 80...500V (phase-phase)
- Connection on dedicated CT
- –/1A or –/5A (selectable) CT operated
- Programmable external CT and VT ratio
- Active energy class 0.5
- Pulse output/alarm/state switching
- RS485 communication
Call for Prices
