Thiim - Special Relays
Thiim specializes in relay and electronic solutions, offering comprehensive monitoring and measurement products for low-voltage electrical installations, ensuring electrical safety within a large range of applications.
The range includes standard products, featuring a selection of Thiim relays, optimized for earth fault current detection, current and voltage measurement, and phase failure monitoring.
Thiim Authorised UK Trade Partner Products are available to our UK Customers.
-
Thiim DDEA DC Earth Leakage Relay 45mm
Call for Prices- Monitors Insulation deterioration and faults
- Programmable leak current limit
- Monitors wide range of system voltages
- Self-supplied from distribution system
- Time delay individually adjustable
- Relay function 2x1C/O (leak from + or -) or 1x2C/O
- Fail Safe mode operation
- Selectable latch function
- 3-digit display shows current leak
- LEDs indicate relay, latch and timing function
-
Thiim DDCA Differential DC Current Relay 55mm (5…200 mA IN, 4…12…20mA OUT)...
Call for Prices- Integral Transformer
- Dipswitch selectable set-points : - 5, 10, 20, 50, 100, 200mA
- Time range during run : Separate On and Off delay 0…10sec. adjustable
- Response Time <200msec
-
Thiim SYND XXXX B400 AA5C Synchro Multi-Function Check Relay 55mm
Call for Prices- Multi function check relay
- Extremely compact
- DIN rail mounting
- Three wire interface for panel indicator
- Microcontroller and SMD
- LED indication of bus and generator status
-
Thiim UMCA Multi-Function Voltage Relay for AC and DC voltage
Call for Prices- Balanced input for noise immunity
- Input voltage 50mV…500V
- 11 programmable input ranges
- 4 programmable times for power up reset
- 4 programmable time ranges
- Separate adjustable ON and OFF delay
- Relay function can be inverted
- Adjustable upper or lower limit and differential
- Latch function available
- LEDs indicate the state of the input
- LEDs indicate the timing function
- LED indicates the state of the relay
- SMD - technic
- 0…1V DC control output for full scale
-
Thiim BMCA Battery Voltage Monitoring Relay
Call for Prices- Supply from the battery
- Programmable voltage 12V, 24V, 48V & 110V
- LEDs indicate the state of the input
- Programmable OFF delay 0…10sec or 0…100sec
- Programmable Latch for over voltage
-
Thiim BVSA Battery Symmetry Monitoring Relay
Call for Prices- Supply from the battery
- LED status and fault indication
- Latch for symmetry failure
- Adjustable symmetry level
- Adjustable Timeoff delay
- Test and reset button
- Terminals for remote test and reset
